How to fill Distiled Water (BATTERY WATER ) in Vehicle or Invertor Battery. Simple Guidelines for Extending Battery Life
Allow a fully saturated charge of 14–16 hours. Charge in a well-ventilated area.
Always keep lead acid charged. Avoid storage below 2.07V/cell or at a specific gravity level below 1.190.
Avoid deep discharges. The deeper the discharge, the shorter the battery life will be. A brief charge on a 1–2 hour break during heavy use prolongs battery life.
Never allow the electrolyte to drop below the tops of the plates. Exposed plates sulfate and become inactive. When low, add only enough water to cover the exposed plates before charging. Always fill to the correct level after charge.
Never add acid. This would raise the specific gravity too high and cause excessive corrosion.
Use distilled or de-ionized water. Tap water may be usable in some regions.
When new, a deep-cycle battery may have a capacity of 70 percent or less. Formatting as part of field use will gradually increase performance. Apply a gentle load for the first five cycles to allow a new battery to format.
New batteries with low capacity many not perform as well as those that begin life with a high capacity. Low performers are known to have a short life. A capacity check as part of acceptance is advisable.
A start-stop battery typically has 25 percent more lead than a standard starter battery to attain a high cycle count. This is reflected in the corresponding price premium.
Tags: How to fill Distiled Water (BATTERY WATER ) in Vehicle or Invertor Battery, BATTERY, fill distilled water, battery safety, battery charging, good battery, when low battery, right method fill battery water, how to fill water in inverter battery, how to fill water in inverter battery in hindi, how to fill water in car wiper, how to fill water in car wiper tiago, how to fill water in car radiator, how to fill water balloons, how to fill water balloons without a tap, battery life hacks, battery life hacks android, battery charger, battery charger 12v